Shop now, pay later with
Get this product with 3 payments of £13.33

Black Precast Tiles Perfect For Playgrounds, Gardens, Balconies and Garages

Our 100% recycled black tiles are cost effective, attractive, strong, durable, non-slip, low maintenance, easy to install and weather resistant. They are the perfect product for use under low level childrens play equipment, as roof tiles, balcony flooring, gym flooring and much more!

  • Quantity: Pack of 4 tiles
  • Size: 500x500x30mm
  • Colour: Black
  • Tile weight: 6kg
  • Material: Recycled Rubber
  • Critical Fall Height: Up To 1m
  • Colour options available: Red/Green/Black
  • Expansion Tolerence: 10%

Not sure how many rubber tiles you need?

Rubber Tile Calculator
Hide Calculator
Area Width: (in metres)

Area Length: (in metres)
CALCULATE
For the measurements given you will require
rubber tiles.
You need to purchase boxes
Click to add these to your cart.
ADD TO BASKET
Read full description
IN STOCK - Delivery within 3-5 working days
Delivery costs will be calculated at the checkout page
Shop now, pay later with

£40.00 inc VAT

£33.33 +VAT

The-Garden-Range-Logo-Square

You may also like…

About Our Black Rubber Tiles

Made from 100% recycled rubber our tiles are a versatile, non-slip, weatherproof, strong, durable, low maintenance and cost-effective flooring solution for so many applications including play areas, roofing, balcony flooring and so much more. Despite its toughness, the tiles still keep natural drainage routes open to allow air, water and essential nutrients to reach the ground below which is not always the case with other rubber flooring products. Used in a number of ways from creating playground flooring to be used on roofs, our tiles are the ideal product for so many projects thanks to their many benefits. Once installed you may need to maintain should they get dirty by simply cleaning the tiles with warm soapy water. As we also stock other coloured tiles, you can either create one solid colour area or make decorative or patterned areas by using the different coloured tiles.

Due to the typical manufacturing tolerances and the expansion and contraction of rubber under temperature fluctuations, we cannot guarantee that all holes will be aligned and some tiles may require additional bonding or drilling to create perfect alignment. These tiles are supplied with 8 pins per tile to assist with installation but are not sold as interlocking, therefore any tiles with alignment issues will not be deemed to be faulty.

What Can The Tiles Be Used For?

Our fully recycled rubber tiles are versatile rubber flooring solutions that can be used in all weathers to create durable yet soft underfoot rubber surfaces for a multitude of applications. Being easy to install using rubber adhesive, our tiles are a simple yet effective solution for so many applications. You can create vibrant or natural-looking, low maintenance areas by using one colour or multiple coloured tiles for solid or patterned surfaces. Thanks to the tiles many benefits they can be used in ways we may have never even thought of which is what makes them such an exciting product. Below are just a few examples of how our tiles have been commonly used and continue to be used:

Playground Flooring

Our rubber play mats can be used in both low-level commercial playgrounds and domestic play areas under smaller play equipment to create a stable, non-slip and low maintenance safety flooring. Tested to BS EN 1177 standards, each tile has a critical fall height of one meter so is suitable for low-level child’s play. Available in Red, Green or Black you can create attractive, stimulating and vibrant ground whilst increasing the safety of the play equipment. As well as being used next to play and climbing equipment, some customers have also used the tiles in sensory gardens, outside exploring areas and so much more. The tiles create a soft, safe and decorative flooring to encourage children to continue their development safely outdoors whilst giving you piece of mind that there is a safe flooring where your children are playing.

Roof Tiles

The strength, durability, easy maintenance and weather resistance of our tiles make them an ideal product for creating hard standing and attractive rubber surfaces for single pitch or flat roofs. A rubber roof is easy to create using our tiles by simply laying a waterproof substrate before using rubber adhesive to secure them to the substrate. Once installed, you will have an attractive, noise-reducing, thermally insulating and anti-slip roofing solution that will last for years to come.

Balcony Flooring

Our tiles are a fantastic and easy to install product which is great for creating a balcony, terrace or veranda flooring that will carry benefits that other products are not able to produce. The previously mentioned benefits will allow you to have a soft surface so you are able to walk barefoot, a weather-resistant floor which will not rot if exposed to water or be affected by extreme hot and cold temperatures and a secure covering that will not separate when walked on.

How Do You Install The Tiles?

Interlocking Method (For use on a granular base):

  1. Prepare your granular sub-base of soil or sand etc. You must ensure that your hardcore is level and well compacted by using a vibration plate.
  2. Measure and mark out your area where the tiles will be installed. Install an edging system around the perimeter of where the tiles will be laid to prevent outer edges moving (this can be made from concrete, plastic, timber or rubber).
  3. On top of the prepared granular sub-base, start in one corner and lay the tiles one row at a time, connecting and butting together any neighbouring tiles using the interlocking pegs. Push the interlocking pegs halfway into the pre-drilled holes of a tile before pushing the next tile onto two of the pegs sticking out and ensure they are pressed tightly together with no gaps visible. Repeat this process of laying one row at a time (either straight or brick-bond for more flexibility) and connecting as you go along until the entire area has been filled.
  4. If desired, polyurethane adhesive can be used in the joints of each tile to ensure total integrity and ensure the tiles are fixed sufficiently to prevent migration of materials.

Non-Interlocking Method (For use on a solid base):

  1. Prepare your sub-base, concrete or tarmac. Ensure your concrete is sealed, fully cured, crack and gap-free. Or ensure that your tarmac is hard, flat, dry, fully cured over 30 days and is free of all impurities.
  2. Measure and mark out your area where the tiles will be installed. Install an edging system around the perimeter of where the tiles will be laid to prevent outer edges moving (this can be made from concrete, plastic, timber or rubber).
  3. Using an appropriate polyurethane adhesive, apply 4 rows of the adhesive to underside of the tile in a 3mm bead. Secure the tile in place and ensure there is a 3-4mm joint between each tile that can be filled with sand or another fine-grade, porous medium which allows for tile expansion over time. Repeat this process until the area has been filled and the tiles are butting with the edging installed earlier.

If you require more information on our tiles or would like some advice on whether or not they would be suitable for your project, please do not hesitate to get in touch today. Leave us a message or live chat to a member of our staff now.

Additional information

Weight 6 kg
Dimensions 500 × 500 × 30 mm
Colour

Pack Size

EAN
ASK A QUESTION

What are rubber play tiles suitable for?

They are suitable for low level children’s play equipment, as roof tiles, balcony flooring, gym flooring and more. Please contact us on live chat if you are unsure.

How do you cut or trim rubber tiles?

Rubber tiles are easily cut and trimmed with a stanley knife. You can see how in our How To Cut A Rubber Tile video.

Are the pegs included?

Yes, pegs are included to assist with installation but are these are not sold as interlocking mats.

Can I secure the rubber tiles to an existing solid surface?

Yes if used with the right installation and the use of a suitable rubber adhesive.

Have the tiles been certified?

Tested to BS EN 1177 standards, each tile has a critical fall height of one meter so it is suitable for low-level child’s play.

Can I order a Rubber tile sample?

Yes, you can either buy one of our “samples” and pay for shipping, or buy one quantity of the item.

Can tiles be installed and left out all year round?

Yes, they are heavy-duty products and suitable to be left out all year round.

How do I clean the rubber tiles?

We recommend the use of warm, soapy water.

Can I be guaranteed the same colour all throughout my product?

Our products are new generation manufactured entirely from post-consumer recycled rubber; this means you may occasionally find very slightly different shades of colour.

Where can I find installation instructions?

Install guides can be found on the ‘downloads’ tab. In addition, more information on installations can be found through our blogs.

How much is delivery?

The cost for delivery can be seen when you add your product to basket and at checkout.

How quick is shipping?

An expected delivery time will be displayed on the product page and clearly at checkout.

Spec Sheet & Install Guide

No videos added yet. If you have a question, feel free to contact us
Rubber Tiles Used To Create All Weather Golf Tees
Glynhir Golf Club Rubber Play Tiles Featured Image
See how Glynhir Golf Club used our green and black rubber tiles to create a non-slip, all weather golf tee on their courseread more ❯
All Weather Tees Made Using Rubber Tiles At Glynhir Golf Club
Rubber Tiles Used To Create All Weather Tee
A second blog from Glynhir Golf Club, see how they used our rubber tiles to create more all weather teesread more ❯
Rubber Play Tiles Used To Create A Safe Play & Learning Area
Creating A Safe Play & Learning Area Using Rubber Play Tiles - Featured Image
See how Simon used our Rubber Play Tiles as a safe flooring solution for a local nurseries playing and learning arearead more ❯
The Advantages Of Using Rubber Roof Tiles
Rubber-Roof-Tiles-Featured-Image
Learn more about Rubber Roof Tiles and the benefits of using them as the tiling solution for your roofread more ❯
Rubber Play Tiles To Create Sensory Play Area
Sensory-Play-Trail-Installation-Using-Rubber-Play-Tiles---Featured-Image
See how Park Lane Community Garden used our red and green rubber tiles to help create a sensory play arearead more ❯
Rubber Tiles Used As Gym Flooring By Absolute Interiors
36 Rubber Play Tiles Used To Create Gym Flooring - Featured Image
Case study from Absolute Commercial Interiors who used our black rubber tiles as gym flooring at a commercial gymread more ❯