About Our Grey 1.2m EcoLat Edging Roll
EcoLat is a decorative edging product made from entirely post-consumer recycled plastic. It is the ideal environmentally friendly product for creating beautiful divisions between landscaped areas such as lawns, flower beds, paths, patios, driveways and much more. Available in slate grey or brown and in roll sizes of 20m, 10m and 1.2m we are sure to have a colour or size to fit your projects needs perfectly. It is a strong, flexible, durable and versatile product which can be contoured to fit around bends and create circles or installed as straight edges to prevent crumbly edges, plants or grass from growing outside of their boundary and gravel or other material migration.
Why Should I Use EcoLat In My Project?
EcoLat is the ideal product for both commercial and domestic customers looking for an effective, attractive, easy to use and long lasting edging system for installation between two landscaped areas. With size and colour variants you can ensure you pick the right coloured and length edging for your upcoming project. Below is a more in depth look at some of EcoLats many benefits:
One of EcoLat’s main benefits is its appearance which is thanks to its textured surface that gives it a similar appearance to slate. This decorative edging is used by many people to enhance the looks of their landscaped areas whilst creating a solid separation. It compliments grass, plants and other materials very well when installed against them. Available in either grey or brown you can choose a colour that will either blend in or stand out a little more.
EcoLat is an incredibly efficient edging product that provides you with a solid and long-lasting border which has fantastic durability meaning you can work on your garden exactly as you would as if there wasn’t an edging in place. Each roll of EcoLat is strimmer, weather and UV resistant so will not be affected by your work or the UK’s unpredictable weather.
How Easy Is EcoLat To Install?
EcoLat is incredibly simple to install. To start, dig a trench into the area where you are wanting the edging before laying the EcoLat vertically into the trench. Next, hammer in an EcoPic at approximately 1m intervals just behind the edging and screw the EcoLat in to the EcoPic using a chipboard screw. Finally, with the edging in a place and secure, back-fill the area to create a smooth surface and then landscape the surrounding area accordingly.
If you require more information on our EcoLat edging range or would like some advice on whether or not our product would be suitable for your project, please do not hesitate to get in touch today. Leave us a message or live chat to a member of our staff now.