Soft Rubber Tiles Used As A Hot Tub Surround And Shed Flooring

Create a non-slip rubber standing area or walkway around your garden building or hot tub with our non-slip rubber tiles. If you have been searching for a strong yet soft surface, look no further than our rubber tiles. A direct extension from your plastic garden base, these tiles slot straight into your base panel to offer you a soft, non-slip, weatherproof and water resistant surface which can be used all year round and in all weather.

  • Dimensions: 330x330x70mm
  • Pack size: 1 Plastic Base Panel & 1 Rubber Tile
  • Colour: Black
  • Material: Recycled Plastic Base & Recycled Rubber Insert
  • Compatible with: Garden Bases & X-Grid
  • For use with: Garden Buildings, Hot Tubs & Swim Spas
Read full description
This product is expected back in stock around 23 September

£10.00 inc VAT

£8.33 +VAT

Out of stock

Email when back in stock

You may also like…

What Is A Garden Base Panel & Non-Slip Rubber Tile?

This product is an individual plastic garden base panel but with an added non-slip rubber tile which slots perfectly into the top of your plastic base tile to create soft and safe walkways or standing areas. These are a great addition to your garden building or hot tub where the surrounding areas could become slippery and hazardous without the correct non-slip flooring in place. Specially designed to fit perfectly into our garden base panels, you won’t find these versatile non-slip rubber tiles anywhere else. Each pack you order contains one plastic base tile and one non-slip rubber tile. The rubber tiles are manufactured from 100% recycled rubber so just like our plastic garden bases they are water-resistant and will not rot away.

When installed alongside our plastic shed bases, the non-slip rubber tiles can provide you with a strong, soft and non-slip flooring within your garden building. The flooring will prevent slipping if your feet are wet and add a little more comfort whilst walking around your shed.

When installed alongside our hot tub bases, the non-slip rubber tiles allow you to create walkways or standing areas around your hot tub or swim spa to provide a soft and non-slip area which can be used barefoot both before and after bathing without the risk of slipping.

For more information on installing your own plastic garden base please read and follow our installation guide. For more information on our non-slip rubber tiles or if you require some advice to help you decide which is the best product for your needs, please don’t hesitate to contact us. Call us, live chat to a member of our team or leave us a message.

Additional information

Weight 3.6 kg
Dimensions 330 × 330 × 70 mm
EAN
ASK A QUESTION

How do the rubber tiles and garden base panel connect together?

The rubber tiles insert has been specially manufactured to fit perfectly into our garden base panels so can be easily slotted into the top of one panel.

Can I buy, separately, the top of the hot tub non-slip tile?

Unfortunately, not, they come together.

Does this product come with pins or membrane?

No, this particular base comes with neither pins or membrane.

Which membrane should I use?

We recommend using a woven membrane with a plastic shed base

Do I need pegs to secure my base?

Only areas which have a gradient over 12% will require pegs.

How do I know which side of the panel to put down?

The bottom of the base has ‘X-grid’ written on it, indicating the face you put on the ground.

Can the base panels be stacked on top of each other?

No, the bases were not designed for to be stacked when installed.

Can I be guaranteed the same colour all throughout my product?

Our products are new generation manufactured entirely from post-consumer recycled plastic; this means you may occasionally find very slightly different shades of colour.

Where can I find installation instructions?

Install guides can be found on the ‘downloads’ tab. In addition, more information on installations can be found through our blogs and YouTube videos.

What sub-base do I need under my shed base?

We recommend you prepare the ground below your base with approximately 70-80mm of a compact hard base (type 1 or type 3), a weed-suppressing membrane and sand to level.

What is the difference between compact hard base type 1 or type 3?

Compact hard base, type 1 is much finer and can occasionally dust while the compact hard base, type 3 is larger and more permeable.

Can I put the base straight onto grass or soil?

We recommend not installing directly onto grass or soil but instead install onto a compact hard base or similar as it creates a sturdy, even base. Soil or grass can and most likely will absorb water leading to sinking and creating an uneven sub-base for your shed base.

How much is delivery?

Delivery is £10 for any quantity of grids, bases, mats, tiles and accessories.

How quick is shipping?

We typically endeavour your product to be delivered within 3-5 working days but the expected delivery time of your purchase will be displayed clearly at checkout.

How are the products packaged?

We take great care when packaging your order to ensure that our products reach you in the best possible condition. In addition, we are always trying to be more sustainably friendly therefore try to minimize the amount of plastic packaging we use around our products and use recycled packaging.

No downloads added yet. If you require something specific please contact us.
Garden Base Installation Video
No blogs added yet. If you have a question, feel free to contact us