What Do I Use X-Grid Anti-Pull Pegs For?
These 200mm long, ribbed, anti-pull, black plastic anchor pegs are used for increased security mainly on sloped areas to prevent X-Grid panels from slipping or moving once they have been installed. The ribbed design prevents the anchors from being pulled up or moved even under the most testing of conditions to ensure each X-Grid panel remains in place. Whilst giving an effective fixing, the anti-pull pegs are also safer than metal pins, especially when used near power cables, animals and machinery.
Manufactured from a durable plastic polymer, all of our anti-pull X-Grid anchor pegs are weather-resistant and UV-resistant to give them an even longer serviceable life.
Installation is quick and simple too; install your X-Grid as you wish and use a maximum of 5 pegs per square metre. Push the peg down into a gap of the x-grid and ensure it sits flush with the floor, if the ground is hard and difficult to push the peg in place, use a rubber mallet to knock each anchor into the ground. You can then proceed to finish your installation by filling the grid with either gravel or another material.
If you require more information on our X-Grid anchor pegs or would like some advice on whether or not X-Grid and these anti-pull pegs are suitable for your upcoming project, please do not hesitate to get in touch today. Call us or live chat to a member of our staff during office hours or leave us a message outside of these times.